Greece OTE netmod isdn bri pstn
VoIP PBXs, Datacenters, Cabling Installation, KNX
VoIP PBXs, Datacenters, Cabling Installation, KNX
15809
post-template-default,single,single-post,postid-15809,single-format-standard,bridge-core-3.1.4,qode-page-transition-enabled,ajax_fade,page_not_loaded,,qode-theme-ver-30.3,qode-theme-bridge,qode_header_in_grid,wpb-js-composer js-comp-ver-7.5,vc_responsive

Greece OTE netmod isdn bri pstn

Greece OTE netmod isdn bri pstn

For Greece, OTE, the signalling is ptmp.
Hence, the configs below apply for ISDN BRI B400P and TDM400P PSTN:

system.conf:
Span 1: B4/0/1 “B4XXP (PCI) Card 0 Span 1” (MASTER)
span=1,1,0,ccs,ami
# termtype: te
bchan=1-2
hardhdlc=3
echocanceller=oslec,1-2

# Span 2: B4/0/2 “B4XXP (PCI) Card 0 Span 2”
span=2,2,0,ccs,ami
# termtype: te
bchan=4-5
hardhdlc=6
echocanceller=oslec,4-5

# Span 3: WCTDM/4 “Wildcard TDM400P REV E/F Board 5”
fxsks=7
echocanceller=oslec,7
# channel 8, WCTDM/4/1, no module.
# channel 9, WCTDM/4/2, no module.
# channel 10, WCTDM/4/3, no module.

# Global data

loadzone = gr
defaultzone = gr

genconf_parameters:
echo_can oslec
bri_sig_style bri_ptmp
context_lines from-zaptel
lc_country gr

chan_dahdi.conf:
[trunkgroups]

[channels]
context=from-pstn
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
relaxdtmf=yes

;Uncomment these lines if you have problems with the disconection of your analog lines
;busydetect=yes
;busycount=3

immediate=no

#include dahdi-channels.conf
#include chan_dahdi_additional.conf

You should get most of them by auto detecting hardware. However, if it does not work, you got them!

No Comments

Sorry, the comment form is closed at this time.